London, Ontario

Interior Renovation in London

Thinking about interior renovation for your London home? Skip the phone tag. Describe the project in the form, attach photos, and get a price back โ€” usually the same day.

Below is what this kind of project involves around London, and an honest look at what moves the price โ€” no invented flat rates.

Interior Renovation in London: what to expect

Southwestern Ontario around London carries a lot of older housing, and renovations here routinely open walls onto the past โ€” dated wiring, plaster, and framing that predates modern spans โ€” so good quotes carry honest contingency.

For interior renovation specifically, the London housing stock is part of the picture: Parts of Old North, Wortley Village, and Woodfield fall within heritage conservation districts, so exterior changes there can need approvals beyond a standard building permit.

About London homes

London's housing runs from yellow-brick Victorians in Old North and Wortley Village to the ranches and sidesplits that filled Oakridge, Westmount, and the east end after the war. That mix means renovation work here is rarely cookie-cutter: heritage-minded kitchen and bath updates in century homes, full main-floor reconfigurations in post-war bungalows, and basement conversions near Western and Fanshawe aimed at student and rental income.

A lot of London projects start with good bones and dated layouts โ€” closed-off kitchens, a single bathroom serving three bedrooms, unfinished basements with decent ceiling height. If you own one of them and have been sketching a better floor plan for years, tell us what you have in mind and we'll line up a free quote from renovation contractors who work in London every week.

  • Parts of Old North, Wortley Village, and Woodfield fall within heritage conservation districts, so exterior changes there can need approvals beyond a standard building permit.
  • London's signature yellow-brick century homes often carry original plaster, dated wiring, and old galvanized plumbing that should be priced into any major renovation.
  • Post-war subdivisions across the east and south ends are full of bungalows well suited to open-plan conversions and basement apartments.

What affects your London interior renovation cost

Rather than a made-up number, here's an honest look at what drives the cost of interior renovation in London:

  • Number of rooms in scope and how much existing finish has to come out first
  • Condition of the walls and floors, since out-of-true framing adds scribing and levelling time
  • The age of the home โ€” much of London's housing has been standing a long while, and what's found once walls open (wiring, plumbing, framing) is the honest wildcard in older-home renovations.
  • Material tier: paint-grade MDF, poplar, or stain-grade hardwood
  • Amount of custom millwork versus stock profiles and off-the-shelf doors
  • Whether painting is included or handled by a separate painter
  • Access and occupancy, because working around furniture in a lived-in home slows every trade

For the full breakdown of what interior renovation involves, see our Interior Renovation guide โ€” then request a free London quote for your actual job.

Common questions

Do you actually take projects in my part of London?
Requests come in from right across London, not just the busiest neighbourhoods. Put your postal code in the quote form and we'll confirm coverage right away.
How fast can I get a quote in London?
Most London requests get a response the same day. The more detail you give โ€” measurements, photos, what you want to change โ€” the more accurate the first quote is.
Is a smaller interior renovation project worth requesting in London?
Yes โ€” a single room or one focused upgrade is a perfectly good project. Scoped well, smaller London projects run fast, and they're often the sensible first phase of a bigger plan.
Do I need a permit for an interior renovation in Ontario?
Purely cosmetic finishing work such as trim, doors, panelling and built-ins does not normally need a building permit. A permit becomes necessary once the project touches structure, plumbing or new wiring. If your scope grows to include moving walls or adding circuits, the contractor should flag the permit requirement before that portion of the work starts, and licensed trades handle the regulated parts.
What order should the work happen in?
The standard sequence is demolition and removal first, then any wall preparation, then flooring or at least the finished floor height confirmed, then doors and trim, then panelling and built-ins, and paint last. Getting the order wrong shows up later as gaps at the floor line or trim cut short. A single contractor coordinating all of it is the main advantage over booking trades one at a time.

Get your London quote

Tell us what you're planning โ€” one room or the whole home โ€” and get a free quote.